ReadyPlanet.com
dot dot
SCARA Robot THP550

 

 

SCARA Robot THP550

This is a high-speed and high-cycle SCARA robot with arm length 550mm and maximum payload 5kg.
The THP series is a SCARA robots series that is capable of continuously operating for extended periods of time at maximum speed. 
It supports options such as cleanroom design, IP65, and ceiling-mount type.

 

Specifications

 

Arm Length Full length 550mm
First arm 300mm
Second arm 250mm
Range of Motion First axis ±120°
Second axis ±145°
Third axis (Z-axis) 150mm (option: 300mm)
Fourth axis (Z-axial rotation) ±360°
Maximum Speed First axis 375°/s
Second axis 600°/s
Third axis (Z-axis) 2000mm/s
Fourth axis (Z-axial rotation) 2000°/s
Composite speed 6.21m/s
Standard Cycle Time Horizontal direction: 100 mm
Vertical direction: 25 mm, reciprocating
0.30s
(with 2 kg weight)
Load Maximum payload 5kg
Allowable end moment 0.06kg·m2
Position Repeatability X, Y (plane surface) ±0.01mm
Z-axis (vertical) ±0.01mm
Fourth axis (Z-axial rotation) ±0.005°
Input Signal for Hand 8 inputs, 8 outputs
Air Piping for Hand φ4×4
Position Detection Method Absolute encoder mode
Total Weight Approx. 28kg
Attached Cable Standard: 5 m (option: 25 m)
Controller

 

 

 

       

 

Please Contact

Servo Dynamics (THAILAND) Co.,Ltd.

Phone : +66 2 7535625  Fax : +66 2 7535650

E-mail : dmarketing@servoline.com

 




Toshiba - SCARA Robot THP series lineup

SCARA Robot THP700



dot
Product
dot
bulletASM
bulletCopley Controls
bulletFuji Electric
bulletHarmonicDrive
bulletJVL
bulletKollmorgen
bulletLinMot
bulletMaxon
bulletReeR
bulletScancon
bulletThomson
bulletWeintek
dot
Tips & Trick by ABB motion
dot
bulletFlying Shear - Vertical Knife
bulletCut to Length - Vertical Knife
bulletProduct Labeling
bulletFlow Wrapper
bulletCut to Registration - Rotary Knife
bulletOver wrapper
bulletProduct Spacing
bulletProduct Synchronisation
bulletVertical Form Fill Seal (VFFS)
dot
Tips & Trick by Maxon
dot




Copyright © 2010 All Rights Reserved.